0102030405
Engraver ni yɔɔ srɔtoiHewalɛ ni dade fɛɛ he yɔɔ-ni-hereɔ dade fiber laser kadimɔ nɔ pɛpɛɛpɛ
nibii ahe saji
Nɛkɛ fiber laser marker ni yɔɔ srɔtoi nɛɛ kɛ nitsumɔi ni yɔɔ hewalɛ, gbɛjianɔtoo ni haaa he ko ahi shi, kɛ nyɛmɔi ni akɛkadiɔ nii jogbaŋŋ nɛɛ feɔ ekome, ni no haa efeɔ nɔ ni hi jogbaŋŋ kɛha odade kadimɔ he hiamɔ nii fɛɛ. Kɛji akɛ eji nitsumɔhei ni feɔ nibii, tsɔnei, jwetrii, loo tsofafeemɔ he nibii amli jio lɛ, nɛkɛ laser kadimɔ nii nɛɛ haa okadifeemɔ he yibii ni yɔɔ srɔto kwraa baa.
Nibii ni yɔɔ mli kɛ Sɛɛnamɔi ni Yɔɔ He
1. Hewalɛ Nitsumɔ:
Kɛtsɔ fiber laser ŋaalee ni etee hiɛ lɛ nɔ lɛ, nɛkɛ kadimɔ nii nɛɛ kadiɔ dade nibii srɔtoi jogbaŋŋ ni etsɔɔ mli pɛpɛɛpɛ. Kɛjɛ dade, aluminum aloi, dade ni sɛɛ efooo kɛyashi dade ni jara wa nɔ lɛ, etsuɔ fɛɛ he nii mlɛo.
2. He ni Akɛtoɔ He:
Ehe mfoniri ni yɔɔ kuku lɛ haa nɛkɛ laser kadimɔ nii nɛɛ tsuɔ nii jogbaŋŋ ni eŋɔɔɔ he ko babaoo. Enɛ he yɛ sɛɛnamɔ titri kɛha nitsumɔ hei ni he yɔɔ sɛɛnamɔ waa shi ehe miihia ni atsu nii jogbaŋŋ.
3. Kadimɔ ni Pɛpɛɛpɛ:
Laser kadimɔ nii lɛ kɛ ehe fɔ̃ɔ pɛpɛɛpɛfeemɔ kɛ nibii amlitsɔɔmɔ he nyɛmɔi ni yɔɔ srɔto nɔ, ni ehaa nɔ ni hi fe fɛɛ baa kɛjɛɔ okadi fɛɛ okadi mli. Jeee akɛ kadimɔ ni yɔɔ ŋwɛi ŋwɛi lɛ mli ka shi faŋŋ ni ehaa mɔ tsui nyɔɔ emli kɛkɛ, shi moŋ ehiɔ shi be kakadaŋŋ hu.
4. Nitsumɔ ni yɔɔ mlɛo:
Afee tsɔne nɛɛ koni ekɛ nitsumɔ afee mlɛo, ni eyɛ gbɛjianɔtoo ko ni anyɛɔ atsuɔ he nii kɛ gbɛ ni atsɔɔ nɔ akudɔɔ nii. Mɛi ni kɛtsuɔ nii klɛŋklɛŋ kwraa lɛ po baanyɛ ale nitsumɔ lɛ oya, ni amɛná kadimɔ ni mɔɔ shi jogbaŋŋ kɛ tsɔsemɔ fioo ko pɛ.
5. Nitsumɔi srɔtoi:
Kɛ ehe miihia ni okadi tsɔnei bibii ni akɛtsuɔ nii yɛ tsɔne mli lɛ loo okadi dade nibii wuji ni akɛtsuɔ nii lɛ anɔ jogbaŋŋ jio lɛ, laser kadimɔ nii nɛɛ tsuɔ ohe baahiamɔi ahe nii. Enitsumɔi srɔtoi lɛ haa efeɔ dɛŋdade ni he hiaa waa yɛ nitsumɔhei srɔtoi amli.
Nitsumɔi ni Sa
Nitsumɔhei Afeemɔ: Kadimɔ nibii, nitsumɔ dadei, kɛ nibii ni akɛtsuɔ nii lɛ jogbaŋŋ koni eha nitsumɔ lɛ aya hiɛ jogbaŋŋ.
Elɛtrɔnik: Feemɔ okadii kpakpai yɛ kpokpaa nɔ tsɔnei kɛ elɛtrɔnik nibii anɔ.
Jarayeli: Feemɔ nibii ni akpɛ́ ni yɔɔ hwanyaŋŋ kɛ mfonirifeemɔi ni kɔɔ mɔ diɛŋtsɛ he koni ekɛ sɛɛnamɔ afata he.
Tsofafeemɔ He Nibii: Kadimɔ nibii kɛ nibii ni akɛtsuɔ nii lɛ pɛpɛɛpɛ koni ona nɔmimaa akɛ ehi jogbaŋŋ ni eyɛ shweshweeshwe.
Sɛɛfoo
Kɛ akɛ nitsumɔ ni yɔɔ hewalɛ, gbɛjianɔtoo ni haaa he ko ahi shi, kɛ nyɛmɔi ni yɔɔ pɛpɛɛpɛ ni nɔ kwɔ fata he lɛ, nɛkɛ fiber laser kadimɔ ni yɔɔ srɔtoi nɛɛ ji nɔ ni hi jogbaŋŋ kɛha dade kadimɔ. Nɔ fɛɛ nɔ ni onibimɔ lɛ he baahia bo lɛ, ekɛ okadifeemɔ he tsabaai ni tsuɔ nii jogbaŋŋ, ni ja, ni anyɛɔ akɛ he fɔ̃ɔ nɔ haa, ni eyeɔ ebua bo ni ojieɔ ohe kpo yɛ jarayeli ni akaŋshii yɔɔ mli lɛ mli.
tsɔɔmɔi pɔtɛɛ
| Laser henɔ | Fiba Laser |
| Laser jɛɛhe | Raycus 20W 30W 50W/JPT 60W 80W 100W |
| Laser wave lɛ kɛlɛ | 1064nm |
| He ni akɛkadiɔ nii | 110*110mm,150*150mm,200*200mm,250*250mm,300*300mm (kɛji oosumɔ) |
| Kadimɔ oyaiyeli | |
| Hewalɛ shiŋŋfeemɔ (8h) | |
| Hewalɛ ni fe fɛɛ | W 500 |
| Pulse shii abɔ | KHZ 60 |
| Min su | >=0.1mm |
| Pɛpɛɛpɛ ni atĩɔ mli | ±0.003mm |
| Jɔɔmɔ gbɛ | Kɔɔyɔɔ ni mli ejɔ |
| Nitsumɔ mli dɔlɛ | °C-35°C |
| Gbɛjianɔtoo nitsumɔ shihilɛ | JCZ EZCAD |
| Hewalɛ ni akɛhaa | 220V/50Hz (fã kome) loo 110V-60HZ (fã kome) |
| Kadimɔ gbɛjianɔtoo | Niŋmaa, okadii, mfonirii, mfonirii, barcode, gbi kadimɔ, batch yibɔi, serial yibɔi kɛ ekrokomɛi. |
| Gbɛ ni akɛwoɔ nibii amli | Tso Saji ni Akɛwoɔ Maŋsɛɛ |
mfonirii ni yɔɔ fitsofitso
