0102030405
20w in 100w tiang a rangmi a dikthliar in a ttha mi a hmete in aa kharmi laser hmelchunhnak hmelchunhnak suaimi seh
seh kong fianternak
| Seh kong fianternak | Laser Thazaang |
| Fiber Laser Hmelchunhnak Seh LS-YLP-20L/30L/50L/60L/80L/100L Hmanthlak & Cheubang Cazin -Laser Source(Raycus/JPT) -Laser Galvometer Scanning Head -Control Card le Marking Software (Original JCZ Ezcad Mirang/German Version) -Laser thazaang peknak -A ttha ngaimi F-theta Lens 110*110mm -2 Red Pointers -Laser Uknak Case -PC&Monitor/Laptop (Lenovo) -Plug &Play State ah kuat -Ramdang kuatmi thilri chiahnak phunglam he aa tlakmi thilri chiahnak -Nunchung Zuar hnu Riantuannak; Man loin ruahnak cheuhnak le lamhruainak bawmhnak -Aa tlakmi thilri (man pek hau loin): Hriamnam phun 1, huhphenhnak mithmaihuh 1, hneksaknak caah aluminium catlap bawm 1 (cauk 100) | 20W Raycus/MAX |
| 20W JPT MOPA | |
| 30W Raycus/MAX | |
| 30W JPT MOPA | |
| 50W Raycus/MAX | |
| 60W JPT MOPA | |
| 80W JPT MOPA | |
| 100W JPT MOPA |
thilri fianternak
Kan rang tukmi a ttha ngaimi Mini Enclosed Laser Marking le Engraving Machine cu na hmelchunhnak le suainak herhmi caah a sangmi a phichuak a si. 20W in 100W tiang model phunphun in hmuh khawh a si, hi seh nih hin riantuannak herhmi phunphun tlinternak caah kharmi le onmi phun hnih a pek.
Mini Enclosed Laser Marking le Engraving Machine cu riantuan khawhnak le nun saunak caah sermi a si, suimilam 100,000 tiang a ttha tukmi riantuan khawhnak a ngei. Mah nih hin na investment nih caan sau man le zumhawktlak sinak a pek lai ti kha a hngalhter. Cun, seh cu pawngkam caah a ttha i zohkhenh a hau lo, cucaah chawlehnak caah a man a fawimi le a hmunmi thimnak a si.
Hi seh nih a langhtermi thil pakhat cu a hmete in a suaimi a si. A tlawmte lawng a si caah hmun tampi lak loin riantuannak hmun phunphun ah ttha tein aa tlak khawh. A kharmi cabinet suaisam nih a muisam a tthater lawng si loin a hmangtu hna kha laser ttihnung in a huhphenh hna caah himnak zong a ṭhanchoter. Mah nih hin himnak biapi ah chiahmi pawngkam caah thimnak tha bik a siter.
Mah seh a tthatnak le a tthatnak a chuahmi cu ahohmanh nih an tluk lo. Thilri phunphun ah a dikmi le a tlingmi hmelchunhnak le suaimi a pek khawh caah hmannak phunphun caah aa tlak. Thir, plastic, asiloah thilri dangdang he rian na ttuan zongah, hi seh nih aa khatmi le a hlei in a ttha ngaimi phichuak a pek.
Cun, Mini Enclosed Laser Marking le Engraving Machine cu hmantu hna caah a fawinak ding caah sermi a si. A hman a nuammi hmanthlak nih fawi tein hman khawhnak le remh khawhnak a tuah, laser hmelchunhnak thiamnak a thiam tharmi hna hmanh nih fawi tein hman khawhnak a pek. Mah seh a fekmi sernak le a sangmi thiamnak nih a tlawm bik riantuan caan le ttha tein riantuan khawhnak a pek.
A donghnak ah, kan rang tukmi a dikthliar in tuahmi Mini Enclosed Laser Marking le Engraving Machine cu an hmelchunhnak le suai khawhnak tthanchoter a duhmi chawlehnak hna caah a phunphun in hman khawhmi, zumhawktlakmi le a himmi thimnak a si. A nun sau, pawngkam caah thathnemnak, zohkhenhnak um loin hman khawhnak le hman a nuammi suaisamnak he, hlawknak sang le a ttha tukmi thilri a chuahtermi tangka chiahnak a si.
fianternak
| Laser phun | Fiber Laser |
| Laser hrampi | Raycus 20W 30W 50W/JPT 60W 80W 100W |
| Laser tilet sau | 1064nm |
| Hmelchunhnak hmun | 110*110mm,150*150mm,200*200mm,250*250mm,300*300mm (na duh ahcun) |
| Hmelchunhnak rangnak | |
| Thazaang fek tein um khawhnak (8h) | |
| Thazaang dihlak | |
| Pulse frequency | |
| Min sining | >=0.1mm |
| A dikthliar in tuah tthan | ±0.003mm |
| Khuasik ning | Thli lumternak |
| Riantuannak lumternak | 10°C-35°C |
| System riantuannak pawngkam | JCZ EZCAD |
| Thazaang peknak | 220V/50Hz(single phase)asiloah 110V-60HZ(singlephase) |
| Hmelchunhnak phun | Cafang, hmelchunhnak, hmanthlak, hmanthlak, barcode, nithla hmelchunhnak, batch nambar, serial nambar tbk. |
| Thil chiahnak lam | Thing Case Ramdang kuat |
hmanthlak tete
